Sanyo PLV Z3 Owners Manual - Page 35
Computer Adjustment Manual
![]() |
View all Sanyo PLV Z3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Computer Input Computer Adjustment (Manual) Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. This projector has Manual PC Adjustment to enable you to precisely adjust several parameters to match those signal formats. The projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it. 1 Select the PC Adjust Menu with the Point Up/Down button, and PC Adjust Menu then press the Point Right button to enter the sub-menu. 2 Select an item with the Point Up/Down button and press the Point Left/Right button to adjust each item. Fine sync Adjusts an image as necessary to eliminate flicker from the display. Press the Point Left/Right button to adjust value. (From 0 to 31) Total dots Adjusts the number of total dots in one horizontal period. Press the Point Left/Right button and adjust number to match your PC image. Shows status Selected Mode (Stored / Free) of the selected Mode. Horizontal Adjusts horizontal picture position. Press the Point Left/Right button to adjust the position. Vertical Adjusts vertical picture position. Press the Point Left/Right button to adjust the position. Current mode Press the Point Right button to show the information of the connected computer. Clamp Adjusts clamp level. When the image has dark bars, try this adjustment. This arrow indicates that there are other items. Select this item and press the Point Down button to go to the next item. Press the SELECT button to adjust the next item. Press the MENU button to return to the previous OnScreen Menu and store the adjusted value. Go on to the next page... 35
![](/manual_guide/products/sanyo-plv-z3-owners-manual-5933f97/35.png)