Sanyo PLV Z3 Owners Manual - Page 36
Display area, Display area H, Display area V, Reset, Store, Mode free, To store adjustment data,
View all Sanyo PLV Z3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Computer Input Display area Select the resolution at the Display area dialog box. Display area H Adjusts the horizontal area displayed by this projector. Press the Point Left/Right button to decrease/increase value. Select Store to store adjustment data. Display area V Adjusts the vertical area displayed by this projector. Press the Point Left/Right button to decrease/increase value. Reset Resets adjustments to their factory default settings. To clear adjustment data Mode free To clear adjustment data previously set, select Mode free and press the Point Right button. A dialog box will appear and choose one of 5 modes and then press the SELECT button. Store To store adjustment data, select Store and press the Point Right button. A dialog box will appear and choose one of 5 modes and then press the SELECT button. Closes this dialog box. To store adjustment data This Mode has parameters being stored. Direct Operation with Remote control Pressing the RESET button on the remote control, adjustments will reset to their factory settings. Vacant Mode Shows values of "Total dots," "Horizontal," "Vertical," "Display area H," and "Display area V." RESET button LILGLHT RESET MENU CANCEL SELECT NOTE ● Display area, and Display area (H/V), cannot be selected when "480i", "575i", "480p", "575p", "720p(HDTV)", "1035i(HDTV)", or "1080i"(HDTV) is selected in the PC System Menu (p33). 36