Sanyo XU86 Instruction Manual, PLC-XU86 - Page 44
Reset, Store, Progressive, Noise, reduction, Gamma, Sharpness
View all Sanyo XU86 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Video Input Sharpness Press the Point 7 button to soften the image and the Point 8 button to sharpen the image. (From 0 to 15.) Gamma Press the Point 7 8 buttons to obtain better balance of contrast. (From 0 to 15.) Noise reduction Noise interference on the screen can be reduced. Select one of the following to get smoother images. Off...........disabled. L1............lower reduction L2............higher reduction Progressive Interlaced video signal can be displayed in a progressive picture. Select one of the following. Off...........disabled. L1............Select "L1" for an active picture. L2............Select "L2" for a still picture. Film .........Select "Film" for watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press the SELECT button. The confirmation box will appear and then select [Yes]. All adjustments will return to their previous figures. Store To store the adjusted data, select Store and press the SELECT button. Select a level from Image 1 to 4 with the Point ed buttons and press the SELECT button. A confirmation box will appear and then select [Yes]. Stored data can be called up by selecting "Image" in the Image Level Selection on page 42. Quit Exit the Image Adjust Menu. ✔Note: Noise reduction and Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected. (p41) 44 Store item Image Level Menu Move the red framed pointer to an image item to be set and then press the SELECT button. The confirmation box will appear and then select [Yes].