Sanyo XU86 Instruction Manual, PLC-XU86 Network Set Up - Page 30
User PIN C, Wired Informati, Wired Factory Default - user manual
View all Sanyo XU86 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
4. Wired LAN Configurations User PIN Code The User PIN code is to restrict the access from the networks to the projector. After setting the User PIN code, you need to enter it to operate the projector via the networks. 1. Select User PIN code, and press the SELECT button. The User PIN code screen will appear. 2. Set the User PIN code. Set the figures with the Point ed buttons and move to the next items with the Point 7 8buttons. Select "Set" and press the SELECT button to set. To cancel the preset User PIN code, select "Cancel". When you do not want to set the User PIN code, set "0000". It is recommended to set the User PIN code if you use the projector via the networks. You can also change the User PIN code. See "6. Configurations with Browser" ➔ "Advanced Setup" ➔ "User PIN code". (p50) User PIN code Wired information Wired Factory Default User PIN code screen Wired Information (See the menu above.) Select Wired information from the projector menu and press the SELECT button to show LAN setting environment of the currently selected projector. (The description below is an example and different from what will be shown.) NetworkModule Information MAIN PROGRAM : xxxxx BOOT PROGRAM : xxxxx MAC ADDRESS : 08007B650056 IP ADDRESS : 172.21.95.202 SUBNET MASK : 255.255.255.0 GATEWAY ADDRESS : 172.21.95.1 IP CONFIGURATION : Manual ARP + PING : Enable CONNECTED PC : (None) Wired Factory Default (See the menu above.) Return all the Wired LAN settings to the factory default settings which are shown on the next page. 30