Sanyo XU86 Instruction Manual, PLC-XU86 Network Set Up - Page 40
Introduction, Browser Environment, Browser Configuration, Using Proxy Server, Internet Explorer
View all Sanyo XU86 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
6. Configurations with Browser Introduction To operate by the browser, you need to prepare and configure the environment. Check the environment of the browser and configure to operate the projector. Browser Environment Browser is required to support the following version. Microsoft : Internet Explorer Ver.4.0 or later Netscape Communications : Netscape Communicator Ver6.0 or later Browser Configuration Configure the operating environment of the browser. Configuration has to be accurate for proper operation. Using Proxy Server Internet Explorer Start up Internet Explorer. Select "Tools" ➔ "Internet Options". Select the "Connections" tab and click the "LAN Settings" button in the "Local Area Network (LAN) Settings" field. Click the "Advanced" button in the "Proxy Server" field. Enter the IP address set on the projector in the "Do not use proxy server for addresses beginning with" field. Netscape Navigator Start up Netscape Navigator. Select "Edit" ➔ "Setup" ➔ "Category". Select "Details" and "Proxy", and check on "Set proxy manually.". Click the "Display" button and enter the IP address of the projector in the "Proxy server is not used at address starting from the following IP address" field. Not using Proxy Server Internet Explorer Start up Internet Explorer. Select "Tools" ➔ "Internet Options". Select the "Connection" tab and click the "LAN Setup" button in the "Local Area Network (LAN) Setup" field. Check off "Proxy server is used at local address" of the "Proxy Server" field. Netscape Navigator Start up Netscape Navigator. Select "Edit" ➔ "Setup" ➔ "Category". Select "Details" and "Proxy", and check "Connect Internet directly". 40