Sanyo XU86 Instruction Manual, PLC-XU86 Network Set Up - Page 37
User PIN C, Wireless Informat, Wireless Factory Default
![]() |
View all Sanyo XU86 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
5. Wireless LAN Configurations English Computer environment and Wireless LAN connection; Wireless LAN with Easy setting connection will be made via AdHoc IEEE802.11b mode. For setting contents, refer to "Wireless LAN factory default settings". (p38) With the Easy setting, computer's LAN environment setting will be switched to the settings on p38. Because of that, the LAN cannot work for the other operation while using "NetworkModule Client" or "NetworkModule Moderator". After terminating the application, the LAN environment will automatically go back to the previous state. User PIN Code The User PIN code is to restrict the access from the networks to the projector. After setting the User PIN code, you need to enter it to operate the projector via the networks. Select "User PIN code" from the projector menu. Set with the same procedures as setting Wired LAN User PIN code. Refer to "4. Wired LAN Configurations" ➔ "User PIN code". (p30) Wireless Information Display the current LAN connecting environment. Select "Wireless Information" (p35) and press the SELECT button. Wireless Information (Example) NetworkModule Information MAIN PROGRAM : xxxxx BOOT PROGRAM : xxxxx MAC ADDRESS : 08007B650056 IP ADDRESS : 169.254.53.0 SUBNET MASK : 255.255.0.0 GATEWAY ADDRESS : 255.255.255.255 IP CONFIGURATION : DHCP ARP + PING : Enable WIRELESS MODE : 802.11b NETWORK TYPE : AdHoc CHANNEL : 11 SSID : WIRELESS WEP : Disable CONNECTED PC : (None) Wireless Factory Default Select "Wireless Factory Default" from the projector menu (p35) and press the SELECT button. All the LAN settings will go back to the factory default settings. For details, refer to "Wireless LAN Factory Default Settings". (p38) 37
![](/manual_guide/products/sanyo-xu86-instruction-manual-plcxu86-network-set-d61f535/37.png)