Sanyo XU86 Instruction Manual, PLC-XU86 Network Set Up - Page 34

5. Wireless LAN Configurations Attaching the USB Wireless LAN Adapter Insert the USB Wireless LAN Adapter into the USB terminal of the projector. Inserting the adapter after verifying the shape of the connector in order not to break the terminal. CAUTION: Use specified USB Wireless LAN Adapter. If you use other product, the projector will not be operated properly. USB USB Terminal USB Lamp After the USB Wireless LAN Adapter becomes ready for use, the lamp will start to blink green when receiving data. USB Wireless LAN Adapter Setting the Network Environment Set the Wireless LAN network through the projector menu. Detailed network settings will be made with browser. Refer to "6. Configurations with Browser". (p39-54) Complete the settings described in this chapter before performing the steps in "6 Configurations with Browser". Setting Procedures With Easy setting, you can make Wireless LAN settings easily without any complicating settings. (p36) 1. Turn on the projector and select "Wireless" from the input menu of the projector. The Network connection standby display will appear and "Please wait..." message will be displayed. Refer to "3.Names and Functions of the Operation Screen" ➔ "Network Connection Standby Display". (p20) After short time, the message changes to " Ready for use". If the USB Wireless LAN Adapter is not attached to the projector, "Wireless" cannot be selected. 2. Select "Wireless Setting" from the projector menu and press the SELECT button. Select similar environment between LAN 4 and LAN 5 with the Point 7 8 buttons. (LAN 4, LAN 5 and SIMPLE* are factory default settings. Select similar environment to the installation location. For each settings, refer to the chart on p38.) ✳ "SIMPLE" mode is used for simple setting without complicated LAN setting procedures to connect to the Wireless LAN. See "Easy Setting" (p36-37) for details. 34