Sanyo XU86 Instruction Manual, PLC-XU86 Network Set Up - Page 86

10. How to Use the PJ Controller Parameter Description Language Select the desired language from the pull-down menu. Auto Setup Automatically set PC adjustment and correct keystone distortion. Auto PC Adjust. ...Select "On" to automatically set the PC adjustment. Auto Keystone Select Auto to automatically correct keystone distortion, and select "Manual" to set keystone distortion when the Auto set button is clicked. Keystone Press the ed buttons to correct keystone distortion. Check the High Speed box if you wish to increase the variation. Click OFF if you do not need this function. Blue Back Select "ON" or "OFF" to display/hide blue background when no signal is detected. Display Select "ON", "OFF", or "Count Down Off" to display/hide the screen. Logo Select Select the image to show on the starting-up display from "User", "Default" or "OFF". Capture Click "YES" to capture the projected image. The captured image can be used for the starting-up display.(Select User for Logo ) Ceiling By clicking "ON", the image gets reversed vertically and horizontally to adjust to ceiling-mount projection. Rear By clicking "ON", the image gets reversed horizontally to adjust to rear projection. Terminal Select "Computer 2" or "Monitor Out" from the pull-down menu. Standby Mode Click "Normal" or "Eco" to set the Standby Mode of the network. No Show By clicking "ON", the image will be temporarily hidden from view. Freeze By clicking "ON", the image will temporarily freeze. Power Management ........Select "Ready", "Shut Down" or "OFF" from the pull-down menu. Enter the countdown time by clicking 7 8 buttons. On Start By clicking "ON", the projector will be automatically turned on when the power plug is connected to AC outlet. Lamp Control Select the Lamp Mode from "Normal", "Eco" and "Auto". Pointer Select the shape of the Pointer from "Spotlight-S", "Spotlight-M", "Spotlight-L", "Pointer", "Finger" and "Laser". Remote Control Select Remote Control Code from Code1 to Code 8. If you change the code here, you have to change the code of the remote control product at the same time. Key Lock To lock the projector, select "Projector Keys" (Locks the top panel operation)or "Remote Control" (Locks the remote control operation). If you do not need to lock, select None. Fan Adjust the rotating speed of the cooling fans. "L1" is normal and "L2" is slower and quieter mode. Lamp Counter You can reset the lamp counter. Reset the lamp counter only when you change the lamp. Factory Default If you wish to reset all the values you set in the control menu, click "Yes". P-TIMER When you click "P-TIMER", the timer will appear on the projected screen. Click again and the elapsed time will appear. Click again and the timer will disappear. 86