Sanyo XU86 Instruction Manual, PLC-XU86 Network Set Up - Page 66
Projecting the Image, Operating with the PJ Controller
View all Sanyo XU86 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
9. How to Use Network Viewer Projecting the Image Operation can be made with any of 1) PJ Controller, 2) Browser, or 3) Projector. When operating with the projector, first, set the FTP server which provides images with 1) PJ Controller or 2) Browser. Operate as follows. 1) Operating with the PJ Controller 1. Select the projector input (Wired /Wireless). Select "Wireless" for Wireless LAN and "Wired" for Wired LAN for the input source of the projector. Activate " NetworkModule Client" or "NetworkModule Moderator". Detected projector names and IP addresses will be displayed. 2. Specify the projector to display the image. Only one projector can be selected. Select the projector. PJ Controller button 3. Click the PJ Controller button to display the PJ Controller screen. First, make "Initial Setting" from the main menu. Refer to "10. How to Use PJ Control" ➔ "Initial Settings". (p75) 4. Select Network Viewer from the Main Menu. Operation window (next page) will be displayed. [Network Viewer] Network Viewer 66