Sanyo XU86 Instruction Manual, PLC-XU86 Network Set Up - Page 46
Advanced Setup, TCP / IP
View all Sanyo XU86 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
6. Configurations with Browser Advanced Setup (Click "+" mark to display the subitems.) TCP / IP TCI/IP related items can be configured on this screen. Parameter Description IP Configuration Method ..........A desired IP address setup method is selected from "Manual", "DHCP", and "BOOTP". If "DHCP" or "BOOTP" is selected, the IP address is obtained automatically as "DHCP client" or "BOOTP client". At this time, it is necessary that the DHCP server/BOOTP server must be in the environment allowing the network communication. IP Address, Subnet Mask, and Gateway Address fields will be displayed "-.-.-.-", when the IP Address Configuration Method is set to DHCP or BOOTP and failed to get the figures from the DHCP server, the computer cannot be connected to the projector. If the projector fails to obtain IP address from BOOTP server, the existing IP address will be assigned. IP Address Set the IP address in the environment you wish to use. If "IP configuration Method" is set to "DHCP" or "BOOTP", this setting is not needed. Subnet Mask Set the Subnet mask in the environment you wish to use. If "IP Configuration Method" is set to "DHCP" or "BOOTP", this setting may become unnecessary depending on the settings of "DHCP Server" and "BOOTP Server". Gateway Address Set the gateway address in the environment you wish to use. If "IP Configuration Method" is set at "DHCP" or "BOOTP", this setting may become unnecessary depending on the settings of "DHCP Server" and "BOOTP Server". If any segment beyond the router is not used, the gateway address can be remained "255.255.255.255". ARP+PING Select "Enable" or "Disable" the IP address setup using "arp" and "ping" (Refer to P96 for details) Domain Enter the domain name where the projector belongs to. (up to ASCII 254 characters) DNS Server Enter the address of the DNS server. APPLY button Click the APPLY button to update. The screen to restart the projector will be displayed. REFRESH button Update and show the adjusted data. RESTORE Factory Default Settings button ..........Restore the settings to the values at the factory. 46