Sennheiser ew 100 Instructions for Use - Page 53

Ƹ Inserting and changing the battery Ǡ Slide the cover of the battery compartment ¿ in the direction of the embossed arrow until it clicks audibly. Ǡ Open the cover. Ǡ ᕤ Ǡ Insert the 9 V PP3 battery (IEC 6 LR 61). Please observe correct polarity when inserting the battery. Close the battery compartment. Ǡ To remove the battery, push the small red lever Ƹ in the battery compartment towards the bottom side of the receiver. Note: We recommend powering the receiver by a standard PP3 alkaline battery. If powered by a rechargeable 9 V battery, the operating time will be drastically reduced. Connecting the antenna Ǡ Screw the antenna ³ onto the antenna socket (M3 connection). ᕡ ᕦ Connecting sound recording and reproducing equipment Sound recording and reproducing equipment such as amplifiers, video cameras, tape recorders etc. can be connected to the EK 100 receiver. Ǡ Use the supplied line cable with 3.5 mm jack plug to connect the sound recording or reproducing device to the line output (AF OUT) ᕦ. Ǡ Lock the jack plug by screwing down the locking ring. Adjusting the AF output level Use the AF output level control ᕧ to adjust the AF signal level for socket ᕦ. ᕧ 55