Sennheiser ew 100 Instructions for Use - Page 59
Inserting and changing the battery, Plugging the transmitter onto the microphone, Switching
View all Sennheiser ew 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Inserting and changing the battery Ǡ ᕨ Slide the cover of the battery compartment º in the direction of the arrow until it clicks audibly and open the cover. Ǡ Insert the 9 V PP3 battery (IEC 6 LR 61). Please observe correct polarity when inserting the battery. Ǡ Close the battery compartment. ᕡᕢ Plugging the transmitter onto the microphone Ǡ Plug the transmitter's XLR-3 connector ᕡ onto the microphone's XLR-3 socket. Ǡ Tighten the locking ring ᕢ. Note: The transmitter uses the microphone body as an antenna - therefore only microphones with a metal casing should be used for best signal transmission. ᕩµ Switching the transmitter on/off Ǡ Press the ON/OFF button ¾ to switch the transmitter on. The red LED µ lights up. Ǡ To switch the transmitter off, press the ON/OFF button until "OFF" appears on the display. You can then release the button. The red LED goes off. Muting the transmitter Use the MUTE switch ᕧ to noiselessly mute the transmitter's audio signal (this switch does not switch off the transmitter). ᕧ 61