Sennheiser ew 100 Instructions for Use - Page 63
Battery status indication, LED lit up, LED flashing, Changing the microphone module
![]() |
View all Sennheiser ew 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Battery status indication The red LED ¹ provides information on the (remaining) battery capacity: LED lit up: ¹ The transmitter is switched on and the battery capacity is sufficient. LED flashing: The battery is going flat! You should immediately replace the battery! Changing the microphone module Ǡ First remove the battery and leave the radiomicrophone open. Ǡ Unscrew the sound inlet basket. Ǡ Loosen the screw and put it aside. Ǡ Remove the microphone module, as shown. Do not touch the contacts! Ǡ Insert the new module, secure the capsule by tightening the screw, put on the suitable sound inlet basket and coloured identification ring and screw it tight. Ǡ Insert the battery, close the radiomicrophone and put it into operation. Note: Microphone module, sound inlet basket and foam insert form an acoustic unit and must therefore always be exchanged all together. Each microphone module comes with a colour-coded identification ring to distinguish different microphone modules from each other (green = MD 835, blue = MD 845, red = ME 865). 65
![](/manual_guide/products/sennheiser-ew-100-instructions-use-55bfc0f/63.png)