Sennheiser ew 100 Instructions for Use - Page 71

Configuring a frequency memory Transmitters and receivers of the Sennheiser evolution wireless series ew 100 have 4 switchable frequencies(channels presets) respectively to store up to 4 transmission/receiving frequencies. TUNE tune DISPLAY TUNE Frequency CH NO Channel No. 1 1 TUNE Frequency CH NO Channel No. 2 2 TUNE Frequency CH NO Channel No. 3 3 TUNE Frequency CH NO Channel No. 4 4 You can directly switch between the channels presets (u "Selecting the frequency, channel number"). Setting the transmission/receiving frequency Transmission and receiving frequencies are tunable in 25-kHz steps within a switching bandwidth of 32 MHz max. Special notes on multi-channel operation: Several devices of the Sennheiser evolution wireless series ew 100 can be used simultaneously on different frequencies. The factory-preset frequencies are intermodulation-free. Before you program new frequency combinations, please refer to the information on the correct frequency choice given in the planning brochure "Practical Applications in RF Technology" which your local Sennheiser agent has in stock or will be pleased to order for you from Sennheiser. Ǡ Select the channel preset for which you wish to set a frequency. Ǡ Select the "TUNE" menu by pressing the SET button until "TUNE" appears on the display; after a short pause the currently set frequency is displayed. Ǡ With the ̆/̄ buttons you can now select a different frequency. The frequencies are tunable in 25-kHz steps. The new frequency starts flashing on the display and becomes effective immediately. Ǡ Press the SET button to return to the top menu level. The display then switches back to the standard display. 73