Sennheiser ew 100 Instructions for Use - Page 57

Signal and battery status indication The yellow LED » at the top of the SK 100 transmitter lights up if the ᕣ audio signal at the AF input is excessively high (AF peak). ᕢ The red LED · provides information on the battery status: LED lit up: The transmitter is switched on and the battery capacity is sufficient. LED flashing: The battery is going flat! You should immediately replace the battery. Attachment of the transmitter to clothing The SK 100 transmitter is best attached to e.g. the belt with clip ƻ. The clip is detachable so that you can also attach the transmitter with the antenna pointing downwards. To do so, withdraw the clip from its fixing points and attach it the other way round. ƻ Attachment of the microphones The microphone clips Ƽ enable the attachment of the ME 2 and ME 4 clipon microphones to clothing (e.g. tie, lapel). The ME 3 headmic is adjustable to comfortably and securely fit your head. Ƽ Positioning the microphones The ME 3 and ME 4 microphones are directional microphones, i.e. their sound inlet should always be directed towards the sound source (e.g. mouth). The ME 2 with omni-directional pick-up pattern picks up sound equally from all directions. It is the best choice if movements of the speaker's head have to be compensated for. 59