Sharp 4450 FO-4450 Operation Manual - Page 110
Setting 05: TRANSACTION REPORT PRINT SELECTION, Setting 06: RECALL TIMES, Setting 07: RECALL
View all Sharp 4450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Optional Settings Setting 05: TRANSACTION REPORT PRINT SELECTION This sets the condition for printing out a Transaction Report. Enter a number from 1 to 5 as follows: 1 (ERROR/TIMER MEMORY): 2 (SEND ONLY) 3 (ALWAYS PRINTS) 4 (NEVER PRINTS) A report will be printed after an error, timer operation, or memory operation A report will be printed only after a transmission A report will be printed after each transmission, reception, or error A report will never be printed. 5 (ERRO.R ONLY) A report will be printed only after an error occurs ♦ Initial setting: 5 Setting 06: RECALL TIMES This sets the maximum number of times your fax will automatically redial if the line is busy. Enter any number from 0 0 to 1 4 . ♦ Initial setting: 02 Setting 07: RECALL INTERVAL This sets the amount of time your fax will wait between automatic redials when the line is busy. Enter 0 1 for 1 minute, 0 2 for 2 minutes, etc., up to a maximum of 15 minutes. ♦ Initial setting: 05 Setting 08: SECURITY SELECTION Press 1 (ON) to turn polling security on, or 2 (OFF) to turn it off. ♦ Initial setting: 1 108