Sharp 4450 FO-4450 Operation Manual - Page 47
Searching for an auto-dial number
View all Sharp 4450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Sending a Fax by Automatic Dialing 2. Sending Documents Searching for an auto-dial number If you don't remember the Rapid Key or Speed Dial number in which you have programmed a particular fax number, you can search for the number by following the steps below. Once you have found the number, you can dial it and transmit the loaded document by simply pressing START/ ENTER . ♦ You can also use this procedure to search for Group Keys and Program Keys (the name you programmed for the Group or Program key will appear). This can be done at any point in a transmission or polling procedure where you need to press a Group Key or a Program Key. 1 Load the document(s). SEND READY will appear in the display. • Press RESOLUTION CONTRAST and/or to set the resolution and contrast if needed. 2 Press A to search from the beginning of the alphabet, or Z to search from the end. Display: SEARCH DIAL 3 Enter the first character of the stored name by pressing the appropriate letter entry key. • If you don't remember the first letter, go to Step 4 (you will scroll through the list from the beginning). 4 Press or to scroll through the names. Stop when the desired name appears in the display. • If no numbers have been stored under the entered letter, NOT FOUND will appear. 45