Sharp 4450 FO-4450 Operation Manual - Page 79
Timer Operations
![]() |
View all Sharp 4450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Timer Operations 5. Special Functions Timer Operations The Timer function allows you to store a job to be performed automatically at a specified time. Up to 59 timer jobs can be stored at any one time, and the time of each can be specified up to a week in advance. You can use this function to take advantage of lower off-peak rates without having to be there when the operation is performed. DOCUMENT Note: M/? cannot be used for a timer transmission. Initial procedure To store a timer job, first perform the following procedure. After you have completed this procedure, go to the procedure for the specific job you want to store (see the following pages). 1 TIMER Press X/> . (Flip up the Rapid Key overlay if it is down.) Display: TIMER MODE 1=SET, 2=CLEAR 2 Press 1 to select SET. 3 Enter a number as follows to select the desired operation (or scroll to the desired operation with or and press START/ ENTER ). 1 Transmission (SEND MODE) 2 Confidential transmission 3 Polling 4 Serial Polling 5 Broadcasting 4 Enter a two-digit number for the hour ("01" to "12") and a two-digit number for the minute ("00" to "59"). 77
![](/manual_guide/products/sharp-fo4450-fo4450-operation-manual-5396245/79.png)