Sharp 4450 FO-4450 Operation Manual - Page 46
Direct Keypad Dialing
![]() |
View all Sharp 4450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Sending a Fax by Automatic Dialing Direct Keypad Dialing You can also enter a full number with the number keys and then press START/ ENTER to begin dialing. 1 Load the document(s). (Note: If desired, you can load the document after dialing in Step 2, below.) SEND READY will appear in the display. • Press RESOLUTION CONTRAST and/or to set the resolution and contrast if needed. • To send the document ahead of other documents waiting for transmission, press PRIORITY . • To send the document directly from the feeder (not through memory), press DOCUMENT M/? . (Flip up the Rapid Key overlay if it is down.) 2 Enter the number of the receiving machine by pressing the numeric keys. • If a pause is required between any of the digits to access a special service or an outside line, press REDIAL (two seconds per pause). The pause will appear as a hyphen. Several pauses can be entered in a row. 3 Check the display. If the number of the receiving machine shown is correct, press START/ ENTER . • If it is not correct, press STOP to backspace and clear one digit at a time, and then re-enter the correct digit(s). 44
![](/manual_guide/products/sharp-fo4450-fo4450-operation-manual-5396245/46.png)