Sharp AJ-5030 AJ-5030 Operation Manual for Windows® - Page 116
Reception and copying problems
![]() |
View all Sharp AJ-5030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Faxing Problems Reception and copying problems Problem Solution The machine doesn't receive documents automatically. • Make sure that the reception mode is set to AUTO. If you subscribe to a distinctive ring service, make sure that the Distinctive Ring function is set to the correct ring pattern. If you do not subscribe to a distinctive ring service, make sure that Distinctive Ring is set to OFF SETTING. (See Distinctive Ring on page 85.) The power is on, but no reception takes place. • Make sure that the telephone line cord is plugged into the TEL. LINE jack, and not the TEL. SET jack. The printing paper comes out blank when you try to receive a document. • Make sure that the document is loaded properly in the feeder of the transmitting machine. Make a copy or print a report to confirm the printing ability of your machine. The received document is faint. • Ask the other party to send higher contrast documents. If the contrast is still too low, your machine may need service. Make a copy or print a report to check your machine's printing ability. Received images are distorted. • Noise on the telephone line may cause distortion. Have the other party try sending the document again. • Make a copy or print a report on your machine. If the copy or report is also distorted, your machine may need service. The quality of copies is poor and/or spots appear. • Any dirt or material on the scanning glass will cause spots to appear on copies and transmitted faxes. Clean the scanning glass as explained on page 106. 114
![](/manual_guide/products/sharp-aj5030-aj5030-operation-manual-windows174-e8b8c80/116.png)