Sharp AJ-5030 AJ-5030 Operation Manual for Windows® - Page 77
Error Correction Mode, Retransmission times for memory transmission
![]() |
View all Sharp AJ-5030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Optional Settings for Sending Faxes 3. Sending Faxes Error Correction Mode The fax machine is set to automatically correct any distortions in a transmission due to noise on the telephone line before printing at the receiving end. This function is called Error Correction Mode (ECM). ECM is effective for both transmissions and receptions, and is only effective when the other fax machine has ECM as well. If desired, you can turn ECM off. This will slightly increase the amount of memory available for memory transmission and reception. 1 Press these keys: FUNCTION The display will show: 4 0 7 ECM MODE 1=YES, 2=NO 2 Press 1 to turn on ECM or 2 to turn it off. YES NO 1 or 2 3 Press the STOP key to return to the date and time display. STOP Retransmission times (for memory transmission) If a line error or power failure occurs during transmission from memory, your fax will automatically redial the number and attempt to complete the transmission. Retransmission will begin from the page that was being transmitted when the error occurred. Your fax has been set at the factory to make 2 attempts at memory retransmission. If you wish to change the number of attempts, follow these steps: 75
![](/manual_guide/products/sharp-aj5030-aj5030-operation-manual-windows174-e8b8c80/77.png)