Sharp AJ-5030 AJ-5030 Operation Manual for Windows® - Page 62
Chain Dialing for area and access codes, Making changes
View all Sharp AJ-5030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Programming Auto-Dial Numbers 8 Press 1 if the number programmed is an area code or access code to be used for Chain Dialing (see Chain Dialing for area and access codes below). Press 2 (or START) if the number is a regular fax number. 9 Return to Step 3 to store another number, or press the STOP key to return to the date and time display. ON OFF 1 or 2 STOP Step 3 or Chain Dialing for area and access codes You can also program an area code or access code in a Rapid Key or Speed Dial number using the above programming procedure. In Step 8, press 1 to set the number as a Chain Dialing number. After you dial an area code or access code using a Rapid Key or Speed Dial number set for Chain Dialing, the fax machine will wait for you to dial the remainder of the number (you can dial the remainder of the number by pressing a Rapid Key, by pressing the Speed Dial key and entering a Speed Dial number, or by pressing numeric keys). Note that the remainder of the number should not be set as a Chain Dial number if programmed in a Rapid Key or Speed Dial number. ♦ The maximum number of digits that can be dialed at one time by Chain Dialing is 50. Making changes To make changes in a number previously stored, repeat the programming procedure. Select the Rapid Key or Speed Dial number for which you want to make changes in Step 3, and then change the number and/or name when they appear in the display in Steps 4 and 6. 60