Sharp AL-1670 AL-1670 Operation Manual - Page 13
SET-UP
View all Sharp AL-1670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
GETTING STARTED Set-up SET-UP 1 Remove all pieces of tape, then open the document feeder cover and remove the protective material. 2 Use a coin (or other suitable object) to remove the screw. Store the screw in the paper tray as described in step 6 because it must be used if the copier has to be moved. (p. 60) 3 Install the TD cartridge. q For installation of the TD cartridge, see steps 1 and 2 and steps 4 to 7 of TD CARTRIDGE REPLACEMENT on pages 39 and 40. 4 Gently lift and pull out the paper tray until it stops. 5 Remove the pressure plate lock. Rotate the pressure plate lock in the direction of the arrow to remove it while pressing down the pressure plate of the paper tray. 11
11
GETTING STARTED
SET-UP
1
Remove all pieces of tape, then open the document
feeder cover and remove the protective material.
2
Use a coin (or other suitable object) to remove the
screw.
Store the screw in the paper tray as described in step
6 because it must be used if the copier has to be
moved. (p. 60)
3
Install the TD cartridge.
●
For installation of the TD cartridge, see steps 1 and 2 and steps 4 to 7
of TD CARTRIDGE REPLACEMENT on pages 39 and 40.
4
Gently lift and pull out the paper tray until it stops.
5
Remove the pressure plate lock. Rotate the pressure
plate lock in the direction of the arrow to remove it while
pressing down the pressure plate of the paper tray.
Set-up