Sharp AL-1670 AL-1670 Operation Manual - Page 60
Supplies - al
View all Sharp AL-1670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
SUPPLIES Types and sizes of copy paper Paper tray Bypass tray Size 5-1/2" x 8-1/2"* to 11" x 17" Ordinary paper: 5-1/2" x 8-1/2" to 11" x 17" Envelopes: Commercial 10 (4-1/8" x 9-1/2") International DL (110 x 220 mm) International C5 (162 x 229 mm) Weight 15 lbs. to 21 lbs. Capacity Special paper (21 lb. bond paper) 250 sheets 15 lbs. to 34 lbs.** 100 sheets (Ordinary paper) Transparency film, labels, envelopes*** * 5-1/2" x 8-1/2" copy paper can be used in the upper paper tray but cannot be used in the lower paper tray. ** For paper weighing from 28 to 34 lbs., 8-1/2" x 11" is the maximum size that can be fed through the bypass tray. *** Do not use envelopes that have metal clasps, plastic snappers, string closures, windows, linings, self-adhesive patches or synthetic materials. These will cause physical damage to the copier. q For best results, use only paper recommended by SHARP. q Special papers except envelopes must be fed one sheet at a time through the bypass tray. Up to 10 envelopes can be set at one time. Supplies GENERAL INFORMATION Supply part numbers When ordering supplies, please use the correct part numbers as listed below. Be sure to use only genuine SHARP parts and supplies. Supply list Supply TD cartridge Drum cartridge Part number AL-160TD AL-160DR Usable life Approx. 18,000 or 15,000 sheets* Approx. 30,000 sheets *18,000 sheets: Based on copying onto letter-type paper at 5% toned area. 15,000 sheets: Based on copying onto letter-type paper at 6% toned area. (The life of the TD cartridge which has been included in the copier at the factory is approximately 5,000 sheets. (at 6% toned area)) 58