Sharp AL-1670 AL-1670 Operation Manual - Page 29
Interrupting A Copy Run
View all Sharp AL-1670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
MAKING COPIES Interrupting a copy run INTERRUPTING A COPY RUN INTERRUPT is used to interrupt a long copy run so that another job can be done. q SORT or GROUP cannot be selected during interrupt copying. 1 Press the INTERRUPT ( ) key. q The copier will return to the initial settings. q When the SPF is being used, the copier will stop after completing copying of the original which has been fed into the SPF. 2 When the copier stops, remove the original(s) and set the original(s) for interrupt copying. 3 Select the desired available copier functions. 4 Set the number of copies. 5 Press the START ( ) key. 6 When all INTERRUPT copies are finished, press the INTERRUPT ( ) key again to cancel the INTERRUPT mode, and remove the original used for interrupt copying. q The previous copy quantity, copy ratio, copy density, and paper size will be automatically restored. 7 Replace the original for the interrupted job and press the START ( ) key to resume copying. 27