Sharp AL-1670 AL-1670 Operation Manual - Page 47
Misfeed in the paper feed area, Misfeed in the fusing area
![]() |
View all Sharp AL-1670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
MISFEED REMOVAL 2 Check the misfeed location. Remove the misfed paper following the instructions for each location in the illustration below. If the misfed paper is seen from this side, proceed to "C. Misfeed in the transport area". If paper is misfed here, proceed to "B. Misfeed in the fusing area". If paper is misfed here, proceed to "A. Misfeed in the paper feed area". A. Misfeed in the paper feed area 1 Push gently the right side of the front cover to open the cover. Roller rotating knob 2 Carefully remove the misfed paper. Turn the roller rotating knob in the direction of the arrow to assist in removing it. The fusing unit is hot. Take care in removing paper. Do not touch the surface of the drum (green portion) of the drum cartridge when removing the misfed paper. Doing so may damage the drum and cause smudges on copies. 3 Close the front cover by pushing both sides with your hands and then close the side cover by pressing the handle on the cover. q The misfeed ( ) indicator will go out. When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged. B. Misfeed in the fusing area 1 Push gently the right side of the front cover to open the cover. 45 STATUS INDICATORS Misfeed removal
![](/manual_guide/products/sharp-al1670-al1670-operation-manual-ecb3b1b/47.png)