Sharp AL-1670 AL-1670 Operation Manual - Page 22
Reduction/enlargement/zoom
View all Sharp AL-1670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
REDUCTION/ENLARGEMENT/ZOOM Reduction and enlargement ratios can be selected either automatically with the AUTO IMAGE ( ) key or manually with the PRESET RATIO selector ( , ) keys and/or the zoom ( , ) keys. The zoom function enables precise copy ratio selection from 50% to 200% in 1% increments. Automatic 1 Place the original in the document feeder tray or on the original table. MAKING COPIES Reduction/enlargement/zoom 2 When using the original table, press the ORIGINAL SIZE ENTER ( ) key until the indicator for the size of the original on the original table lights up. 3 Use the TRAY SELECT ( ) key to select the paper tray with the desired paper size. q This feature will not work when copy paper of non-standard size is used or the bypass tray is used. 4 Press the AUTO IMAGE ( ) key. q The copy ratio will be automatically set. q If the size and orientation of the original do not correspond to standard reduction/enlargement ratios for the selected paper tray, then the ORIGINAL SIZE indicator will blink. q If a PRESET RATIO indicator is blinking, part of the original image may not be copied. 5 Enter the number of copies. 6 Press the START ( ) key. q To cancel the automatic reduction/enlargement mode, press the AUTO IMAGE ( ) key again. q When copying from the SPF with this feature, the automatic reduction/enlargement mode will be automatically canceled after copying is complete. 20