Sharp AL-1670 AL-1670 Operation Manual - Page 51

USER PROGRAMS The user programs allow the parameters of certain functions to be set, changed, or canceled as desired. List of user programs This copier has the following user programs. Program No. Program name 1 Auto clear time 2 Preheat mode 3 Auto power shut-off timer 4 Stream feeding mode 5 Auto power shut-off setting 6 Border line for 2 in 1 or 4 in 1 Description Sets the auto clear time. The copier returns to the initial settings when the auto clear time elapses after the last copy is made. Sets the time that elapses before the copier enters the preheat mode after any operation is made. See page 52. Sets the time that elapses before the copier enters the auto power shut-off mode after any operation is made. See page 52. Enables or disables the stream feeding mode. For description of the stream feeding mode, see page 17. Enables or disables the auto power shut-off mode. See page 52. Enables or disables the border line which is printed in 2 in 1 or 4 in 1 copying. See page 35. 7 Rotation copy Enables or disables rotation of original images. See page 34. 8 Auto paper select mode Enables or disables the auto paper selection. See page 16. 9 Auto tray switching Enables or disables the automatic tray switching which occurs when paper in a tray runs out. (This switching cannot switch to the bypass tray.) 16 Erase width adjustment Sets the amount of the edge erase and center erase areas. See page 37. 17 Layout in 2 in 1 copy Selects a pattern for 2 in 1 copying. See page 35. 18 Layout in 4 in 1 copy Selects a pattern for 4 in 1 copying. See page 35. 19 Offset of paper output Enables or disables the offset function of the paper output tray. See page 25. tray User programs GENERAL INFORMATION Setting the user programs 1 Press and hold the light ( ) key for more than 5 seconds until all the alarm indicators ( , , , and ) blink and "- -" appears in the copy quantity display. 49