Sharp AL-1670 AL-1670 Operation Manual - Page 39
Erase
![]() |
View all Sharp AL-1670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
ERASE Edge erase AA Center erase A B A B Edge + Center erase AB AB This copier has an edge erase mode and a center erase mode. q Edge erase can be used to eliminate shadow lines around the edges of copies caused when thick paper or a book is used as an original. q Center erase can be used to eliminate the shadow produced by the bindings of bound documents. q Edge + center erase can be used to eliminate shadow lines around the edges of copies and to eliminate the shadow at the center of copies. q The erase width can be set from 0" to 1" in five steps using user program No. 16. See page 49. q This feature cannot be used with the 2 in 1 or 4 in 1 feature. 1 Place the original on the original table and close the document feeder cover. q The SPF can also be used for this feature. 2 Use the TRAY SELECT ( ) key to select the paper tray with the desired paper size. q The bypass tray and any tray with non-standard size paper cannot be used for this feature. 3 Press the ERASE key to select the desired erase mode. q To select the EDGE + CENTER ERASE mode, press the ERASE key until both the EDGE and CENTER indicators light up. 4 Set the number of copies and press the START ( ) key. SPECIAL FEATURES Erase 37
![](/manual_guide/products/sharp-al1670-al1670-operation-manual-ecb3b1b/39.png)