Sharp AL-1670 AL-1670 Operation Manual - Page 6
Part Names And Functions
![]() |
View all Sharp AL-1670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
PART NAMES AND FUNCTIONS GETTING STARTED Part names and functions Overall layout q w e r t e o !1 y !0 !2 !3 u !4 i q Document feeder cover Open to make copies from the original table. w Original table All originals which cannot be copied from the SPF must be copied here. e Handles Use to move the copier. r Power switch Press to turn copier power on and off. t Operation panel All copier controls are located here for easy operation. y Paper output tray Finished copies are deposited in the paper output tray. u Front cover Open to remove misfeeds and for copier servicing. i Paper tray Each tray holds 250 sheets of copy paper. o Side cover Open to remove misfeeds and to service the copier. !0 Side cover handle Lift and pull to open the side cover. !1 Bypass tray guides Adjust to the width of the copy paper. !2 Bypass tray Special papers (including transparency film) and copy paper can be fed from the bypass tray. !3 Bypass tray extension Pull out when feeding large paper such as 8-1/2" x 14" and 11" x 17". !4 Charger cleaner Use to clean the transfer charger. 4
![](/manual_guide/products/sharp-al1670-al1670-operation-manual-ecb3b1b/6.png)