Sharp AM 900 AM-900 Online Guide - Page 146
Messages and Signals
UPC - 074000034068
View all Sharp AM 900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Messages and Signals Messages and Signals Display messages ADD PAPER Check the printing paper. If the tray is empty, add paper. If there is paper in the tray, make sure it is inserted correctly (take out the stack, align the edges evenly, and then reinsert it in the tray). Printing will resume automatically when the output tray is replaced. BYPASS MISFEED The paper is not inserted correctly in the bypass tray. Remove the paper and insert it again. BYPASS PAPER! / IF COPY, PRESS (alternating messages) Paper has been inserted in the bypass tray. If the paper has been inserted for a copy job, press A to set the paper size. If the paper is for a print job, the message can be disregarded. CHK SCANNER LOCK / PLS RETURN POWER (alternating messages) Make sure that the scanner lock has been released (see page 12) and then unplug the power cord, wait at least 5 seconds, and plug it back in. COVER OPEN One or both of the print compartment covers are open. Make sure both covers are closed. DATE/TIME UNSET The date and time need to be set (see page 43). Note that the date and time settings will be lost if the machine is unplugged or a power failure occurs. DOCUMENT JAMMED The original document is jammed in the auto document feeder. See the following section, Clearing Paper Jams. Document jams will occur if you load more than 20 pages at once or load documents that are too thick (see page 60). The document may also jam if the receiving machine doesn't respond properly when you attempt to send a fax. DOCUMENT READY A document has been inserted in the auto document feeder and the machine is waiting for you to begin faxing or copying. 144