Sharp AM 900 AM-900 Online Guide - Page 148
Audible signals
UPC - 074000034068
View all Sharp AM 900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Messages and Signals REMOVE / BYPASS PAPER (alternating messages) A fax has been received to memory because paper is inserted in the bypass tray (faxes cannot be printed while paper is in the bypass tray). Remove the paper from the bypass tray to allow the fax to be printed. SYSTEM ERROR [XX] (a number appears in "XX") If this message appears, unplug the power cord, wait about 10 seconds, and then plug it back in. If the message still appears, unplug the power cord and call SHARP's Customer Assistance Center at at 1-877794-8675 (U.S.A. only). SET BYPASS PAPER / SIZE: XXXX (alternating messages; a paper size appears in "XXXX") Paper must be inserted in the bypass tray for a print job or copy job that requires use of the bypass tray. Insert the indicated size of paper in the tray. TONER EMPTY The toner cartridge must be replaced. Printing will be possible (although the output will be increasingly faint) until a fax is received. Once a fax is received, it will be held in memory and printing will not be possible until the toner cartridge is replaced. TONER NEAR EMPTY The toner cartridge is almost out of toner (approximately 200 pages can be printed). TOTAL PAGE(S) 01 Number of fax pages transmitted or received. Audible signals Continuous tone 3 seconds Intermittent tone (3 beeps) 5 seconds (1 second on, 1 second off) Rapid intermittent tone 35 seconds (0.7 seconds on, 0.3 seconds off) Indicates the end of fax transmission or reception. Indicates incomplete fax transmission or reception. Indicates that an extension phone connected to the machine is off hook. 146