Sharp AM 900 AM-900 Online Guide - Page 55
If Duplex Scan is selected
UPC - 074000034068
View all Sharp AM 900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
2. Copying Making a Copy x Contrast: Medium (bar at mid-point) (Note: The default contrast setting can be changed as explained on page 59.) x E-Sort (collating sets of copies): OFF x Duplex Scan: OFF Note: After temporary copy settings are selected, the settings will revert to the above default settings if the auto clear time elapses without any keys being pressed on the operation panel (see page 48). You can also press to reset the settings to the default settings. 4 When you are ready to make the copy, press . x If Duplex Scan is selected: After the stack of originals is fed through the auto document feeder, turn the entire stack over (do not change the order of the pages or remove any pages), insert it into the auto document feeder again, and press . x If you are using the document glass to copy multiple originals and E- Sort is selected: After the original is scanned, the following alternating messages will appear: [START] NEXT SCAN [#] START PRINT Remove the original from the document glass, place the next original, and press . Repeat until all originals have been scanned. After the last original has been scanned, press to begin printing the copies. Maximum original size when using the document glass The maximum original size that can be used on the document glass is letter or A4 (8.5 u 11.7 inches). The maximum scanning width is 8.2" (208 mm), and the top and bottom 0.16" ( 4 mm) of the original cannot be scanned. 53