Sharp DT 500 DT-500 Operation Manual - Page 34
Selecting the Type of, Correction
UPC - 074000364837
View all Sharp DT 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Selecting the Type of Correction Select the Keystone correction method. Press c KEYSTONE on the remote control. • "GEOMETRIC ADJUSTMENT" will be displayed. • Each time c KEYSTONE is pressed, the display toggles as follows: GEOMETRIC ADJUSTMENT H & V KEYSTONE The display disappears. GEOMETRIC ADJUSTMENT For correcting an image by designating the corner of the projected image. (See page 34.) H & V KEYSTONE For correcting an image by designating the horizontal or vertical axes. (See page 35.) Note • When corrections are made with Keystone correction, the changes are saved even if the power cord is unplugged. • Since Keystone correction digitally corrects the signal, resolution may slightly decrease when it is used. Moiré patterns and line distortions may also be visible in detailed images. However, this is not a malfunction. • If you cannot correct trapezoidal distortion with Keystone correction, change the placement position of the projector. • Straight lines and the edges of the displayed image may appear jagged, when adjusting the Keystone setting. • Also read "About Copyrights" on page 37. Basic Operation 33