Sharp DT 500 DT-500 Operation Manual - Page 62

Specifications Product type Projector Model DT-500 Video system NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480I/DTV480P/ DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I/DTV1080I-50 Display method Single Chip Digital Micromirror DeviceTM (DMDTM) by Texas Instruments DMD panel Panel size: 0.65", 1chip DMD Drive method: Digital Light Processing (DLP™) No. of dots: 983,040 dots (1280 [H] × 768 [V]) Lens 1-1.15 × zoom lens, F2.4-2.6, f = 19.0-21.9 mm Projection lamp 275 W DC lamp Component input signal RCA connector (INPUT1/2) Y: 1.0 Vp-p, sync negative, 75 Ω terminated PB (CB): 0.7 Vp-p, 75 Ω terminated PR (CR): 0.7 Vp-p, 75 Ω terminated S-video input signal 4-pin mini DIN connector (INPUT 3) Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated Video input signal RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω (INPUT 4) terminated Computer RGB/ 15-pin mini D-sub connector Component input signal RGB separate/sync on green type analog input: 0-0.7 Vp-p, positive, 75 Ω terminated (INPUT 5) HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative) VERTICAL SYNC. SIGNAL: Same as above HDMI input signal HDMI terminal (video signal only) (INPUT 6) Horizontal resolution 720 TV lines (DTV720P) Vertical frequency 45-85 Hz Horizontal frequency 15-70 kHz Pixel clock 12-85 MHz Rated voltage AC 100-240 V Input current 3.7 A Rated frequency 50/60 Hz Power consumption 355 W (Lamp Setting "Bright")/ 310 W (Lamp Setting "Eco + Quiet") with AC 100 V 340 W (Lamp Setting "Bright")/ 300 W (Lamp Setting "Eco + Quiet") with AC 240 V Power consumption (standby) 4 W (AC 100 V) - 5 W (AC 240 V)*1 Heat dissipation 1,335 BTU/hour (Lamp Setting "Bright")/ 1,165 BTU/hour (Lamp Setting "Eco + Quiet") with AC 100 V 1,280 BTU/hour (Lamp Setting "Bright")/ 1,130 BTU/hour (Lamp Setting "Eco + Quiet") with AC 240 V Operating temperature 41°F to 95°F (+5°C to +35°C) Storage temperature -4°F to 140°F (-20°C to +60°C) Cabinet Plastic I/R carrier frequency 38 kHz Dimensions (approx.) 12 13/32" × 4 19/64" × 11 1/32" (315 (W) × 109 (H) × 280 (D) mm) (main body only) 12 13/32" × 4 47/64" × 11 37/64" (315 (W) × 120 (H) × 294 (D) mm) (including adjustment foot and projecting parts) Weight (approx.) 8.8 lbs. (4.0 kg) Replacement parts Remote control, Power cord for U.S. and Canada, etc., Operation manual *1 When STANDBY Mode is set to "Eco" As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. 61 Appendix