Sharp OZ 290H Operation Manual - Page 36
About USB Ports, Limitations when using with Windows, XP/2000 - problems
UPC - 074000017917
View all Sharp OZ 290H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Note: Proper operation cannot be guaranteed on the following types of PCs: • Self-built PCs • PCs upgraded from Windows® 95 • PCs with retrofit USB ports that are not factory installed * This software is not guaranteed to operate on all PCs with recommended hardware/software environment. About USB Ports • Activating the power saving mode (such as suspend, resume, or sleep function) of some PCs may result in the USB port malfunctioning. If such case is observed, disable the power saving mode. • The software may not operate properly with a commercially available USB card installed in a PCI slot. • If the USB port on your PC or the USB hub connected to the device does not operate properly, follow the steps below: - If your PC comes equipped with several USB ports, try using a different USB socket. - If other USB devices are connected to your PC, disconnect them from your PC to avoid possible conflicts. • Since the USB hub may introduce problems, try bypassing the USB hub by connecting the unit directly to your PC. • Do not remove and connect the USB cable from/to the PC in a short period of time. Limitations when using with Windows® XP/2000 Windows® XP • Log onto your PC with administrator privileges; the software may not be installed properly otherwise. Upon using the software, you will need to log on as an administrator. If you are logged in as a non-administrative account, then you must first log off to log into an administrator's account. Windows® 2000 • When installing as well as using the software, you will need to log on as an administrator. If necessary, you may need to contact the administrator of the PC in a work environment. Installing Precautions: • Prior to installing the Synchronization Software, make sure that Microsoft® Outlook® is installed and set up. If not, install and set up the Outlook® first, then install the Synchronization Software. • Disconnect the USB cable before the installation. If the installation is proceeded with the USB cable connected, you must disconnect the cable, then follow the Read Me file on the CD-ROM to start over the installation procedure. 1. Insert the PC software CD-ROM into your CD-ROM drive. Installation process should automatically start. If the PC software screen does not appear, double-click "My Computer" to locate the CD-ROM drive directory, then double-click to launch "installer.exe" found on the CD-ROM. 2. Click the "Install" button. 34