Sharp OZ 290H Operation Manual - Page 37

3. Follow the installation instructions that appear on the screen. 4. When the installation is complete, click the "Finish" button to finish the installation process. 5. When the USB cable detection window appears, connect the USB connector of the USB PC-Link cable to the PC's USB port, then click "Next". Do not connect the Organizer yet. 6. The USB driver installation window appears. 7. Follow the installation instructions on the screen. 8. When the installation is complete, click the "Finish" button to finish the installation process. 9. When the USB cable detection window appears, click "Next" to have the USB cable detected. Click "Finish" to complete the detection procedure. Note: • If the cable is not detected, refer to the Read Me file on the CD-ROM to start over the procedure. 10. The procedure will then be followed by the Serial Port Setup, and the Synchronization setting window. Note: • For Windows2000® Professional and Windows® XP, install/uninstall programs after logging on as an Administrator. • Apply the USB cable for use with OZ-290H only. The cable cannot be used with other devices. Serial Port Setup The serial port setting dialog box appears after you have finished software installation. Connecting the Organizer to your PC 1. Turn off the Organizer. 2. Connect the other end of the USB PCLink cable to the Organizer's option port. 3. Turn on the Organizer. Click "Auto Detect..." to allow the Synchronization to automatically detect the appropriate serial port. Make sure that the unit is physically connected with the PC first, then click this button. If the desired serial port is not found, manually select the serial port from the drop-down list. 35