Sharp PN-C703B Pen Software Operation Manual - Page 13

USB 2 port for touch panel, RS-232C input terminal

Get Sharp PN-C703B PDF manuals and user guides View all Sharp PN-C703B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Connecting Peripheral Equipment 7. Audio 1 input terminal 8. Audio 2 input terminal • Use an audio cable without resistance. • Set the audio input terminal to be used in each input mode in AUDIO SELECT on the SETUP menu. 9. DisplayPort output terminal • The screen displayed on the monitor and the audio output from the monitor can be output to an external device. • Use a commercially available DisplayPort cable (conforming to the DisplayPort standard). • Outputting HDCP-encrypted video requires an external device which supports HDCP. 10. Audio output terminal • The output sound varies depending on the input mode. • The volume of the output sound can be fixed by setting AUDIO OUTPUT of AUDIO OPTION on the SETUP menu. • It is not possible to control the sound output from the audio output terminals with the AUDIO menu. 11. Touch pen adapter port • Connect the touch pen adapter in order to use the touch pen. (See page 19.) 12. USB 1 port (for touch panel) • To use the touch panel with a computer connected to the terminal below, connect the touch panel to the computer with a USB cable. (Factory setting. Can be changed in TOUCH INPUT SELECT on the SETUP menu.) - D-sub 1 input terminal - DisplayPort input terminal - HDMI 1 input terminal 13. USB 2 port (for touch panel) • To use the touch panel with a computer connected to the terminal below, connect the touch panel to the computer with a USB cable. (Factory setting. Can be changed in TOUCH INPUT SELECT on the SETUP menu.) - D-sub 2 input terminal - HDMI 2 input terminal - HDMI 3 input terminal 14. RS-232C input terminal • The monitor can be connected to a computer using the RS-232C conversion cable (supplied) and a commercially available RS-232 straight cable to control the monitor from the computer. 15. LAN terminal • You can control the monitor from a computer on a network by connecting a commercially available LAN cable between this terminal and a network. 16. External speaker terminals • To use external speakers, set SPEAKER SELECT to EXTERNAL in AUDIO OPTION on the SETUP menu. • Be sure to use external speakers with an impedance of 6 Ω or greater and a rated input of at least 10 W. 1 2 1. While pushing the tab, insert the tip of the cable. 2. Release the tab. TIPS • Be sure to connect the + and - terminals and the left and right speakers properly. • Avoid short circuiting the + and - terminals. • When SPEAKER SELECT is set to EXTERNAL, the internal speakers are disabled. 17. USB cable • To use the USB port on the front of the tray (for USB device) (USB 2.0 compliant), connect the USB cable to the USB port on the computer. USB port (for USB device) Computer * The touch panel must be connected separately. 13 E

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
13
E
Connecting Peripheral Equipment
7. Audio 1 input terminal
8. Audio 2 input terminal
•
Use an audio cable without resistance.
•
Set the audio input terminal to be used in each input
mode in AUDIO SELECT on the SETUP menu.
9. DisplayPort output terminal
•
The screen displayed on the monitor and the audio output
from the monitor can be output to an external device.
•
Use a commercially available DisplayPort cable
(conforming to the DisplayPort standard).
•
Outputting HDCP-encrypted video requires an external
device which supports HDCP.
10. Audio output terminal
•
The output sound varies depending on the input mode.
•
The volume of the output sound can be fixed by setting
AUDIO OUTPUT of AUDIO OPTION on the SETUP
menu.
•
It is not possible to control the sound output from the
audio output terminals with the AUDIO menu.
11. Touch pen adapter port
•
Connect the touch pen adapter in order to use the touch
pen. (See page 19.)
12. USB 1 port (for touch panel)
•
To use the touch panel with a computer connected to the
terminal below, connect the touch panel to the computer
with a USB cable.
(Factory setting. Can be changed in TOUCH INPUT
SELECT on the SETUP menu.)
- D-sub 1 input terminal
- DisplayPort input terminal
- HDMI 1 input terminal
13. USB 2 port (for touch panel)
•
To use the touch panel with a computer connected to the
terminal below, connect the touch panel to the computer
with a USB cable.
(Factory setting. Can be changed in TOUCH INPUT
SELECT on the SETUP menu.)
- D-sub 2 input terminal
- HDMI 2 input terminal
- HDMI 3 input terminal
14. RS-232C input terminal
•
The monitor can be connected to a computer using the
RS-232C conversion cable (supplied) and a commercially
available RS-232 straight cable to control the monitor
from the computer.
15. LAN terminal
•
You can control the monitor from a computer on a network
by connecting a commercially available LAN cable
between this terminal and a network.
16. External speaker terminals
•
To use external speakers, set SPEAKER SELECT to
EXTERNAL in AUDIO OPTION on the SETUP menu.
•
Be sure to use external speakers with an impedance of 6 Ω
or greater and a rated input of at least 10 W.
1
2
1. While pushing the tab, insert the tip of the cable.
2. Release the tab.
TIPS
•
Be sure to connect the + and - terminals and the left and
right speakers properly.
•
Avoid short circuiting the + and - terminals.
•
When SPEAKER SELECT is set to EXTERNAL, the
internal speakers are disabled.
17. USB cable
•
To use the USB port on the front of the tray (for USB
device) (USB 2.0 compliant), connect the USB cable to
the USB port on the computer.
USB port (for USB device)
Computer
* The touch panel must be connected separately.