Sharp PN-C703B Pen Software Operation Manual - Page 30
Rgb Input Range Hdmi[pc]/hdmi[av]/d-sub1[rgb]/d-sub2/displayport, Analog Gain D-sub1[rgb]/d-sub2
View all Sharp PN-C703B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Menu Items ADVANCED AUTO (D-SUB1[RGB]/D-SUB2) The ANALOG GAIN and ANALOG OFFSET are automatically adjusted. Pressing ENTER performs adjustment. ANALOG GAIN (D-SUB1[RGB]/D-SUB2) Adjusts the bright portions of the video input signal. ANALOG OFFSET (D-SUB1[RGB]/D-SUB2) Adjusts the dark portions of the video input signal. 3D-NR (AV input) Reduce the noise of playback images on video. Setting a higher level reduces more noise. However, it may cause blurring on an image. MPEG-NR (AV input) Reduce block noise caused by digital compression. 3D-Y/C (D-SUB1[VIDEO]) Specify whether to perform 3-dimension Y/C separation. If dot interference or cross-color is occurring in fast-motion scenes, selecting "OFF" may improve the image quality. RGB INPUT RANGE (HDMI[PC]/HDMI[AV]/D-SUB1[RGB]/D-SUB2/DisplayPort) Sets the RGB input signal range. When using HDMI or DisplayPort set to AUTO, the RGB input signal range is detected automatically. Use AUTO normally. If the RGB input signal range cannot be set appropriately even when using AUTO, set according to the image. When the setting is different, images will be displayed with washed out blacks and compressed gradients. ACTIVE CONTRAST (AV input) Automatically adjusts the contrast according to the image. (In PIP mode, the main side setting is reflected in the image.) The adjustment operation may not be smooth depending on the image. In this case select OFF. DISPLAY COLOR PATTERN Displays a color pattern. Can be displayed while the menu screen is displayed, so you can refer to the pattern while adjusting the image. OFF No pattern display. WHITE............White single color pattern display. RED Red single color pattern display. GREEN..........Green single color pattern display. BLUE Blue single color pattern display. USER Red/green/blue mixed color pattern display. When USER is selected, set each color's level. RESET Resets the values of the PICTURE menu items to the factory preset values. Select "ON" and then press . ENTER E 30