Sharp PN-C703B Pen Software Operation Manual - Page 20

Touch Panel / Touch Pen Preparations Touch pen actions Only use touch pens that are used with this monitor (supplied touch pens or optional PN-ZL03A). Function button 1 Function button 2 Pen tip LED Function button 3 The factory default settings for the function buttons are as follows. • Function button 1 : Pen Software Link • Function button 2 : PageDown • Function button 3 : PageUp You can change the functions that are assigned to the function buttons. For details, see the Touch pen Management Tool Operation Manual. Using as a digitizer pen A touch pen can be used as a Windows digitizer pen. To use a touch pen as a digitizer pen, change the "Touch Operation Mode Setting" to "Pen digitizer Mode" in the Touch pen Management Tool. For details, see the Touch pen Management Tool Operation Manual. TIPS • Hold the touch pen at the part indicated below. Incorrect operation may result if your finger is too close to the tip of the pen. nTouch pen settings Touch pen settings are configured using the Touch pen Management Tool. For details on the settings and how to use the utility, see the Touch pen Management Tool Operation Manual. Adding touch pens (pairing) • Up to 4 touch pens can be used simultaneously. (Up to 8 touch pens can be registered.) Item Model Remarks Touch pen PN-ZL03A For capacitive touch panel • To use an optional touch pen with the monitor, the touch pen must be registered in the touch pen adapter. (pairing) • Use the Touch pen Management Tool to perform touch pen pairing. For details, see the Touch pen Management Tool Operation Manual. • Perform touch pen pairing for one pen at a time. TIPS • When multiple touch pens are used, touch positions and touch pen information (color, thickness, etc.) may become interchanged, and lines may break. - When touched simultaneously - When touch pens are moved near each other - When batteries are low - When other wireless equipment is operating nearby • Do not press the pen tip on other than the screen. This may cause malfunctioning. • One touch pen cannot be registered in multiple touch pen adapters. • When the function button is pressed, the LED illuminates. If the LED does not illuminate, check if the battery is depleted. • If the LED blinks orange, the battery is low. • If not connected to the touch pen adapter, the LED will blink light blue. • Use function buttons near the front of the screen. If too far away, operation will not be possible. • Press function buttons slowly and firmly. If pressed too quickly, the action may not be recognized. • The line may break if the touch pen battery is low or there is other wireless equipment in operation nearby. • If the pen tip becomes damaged and the touch panel does not respond, replace the pen tip. * When inserting the touch pen tip, insert firmly all the way in. • The pen tip is made soft to protect the screen and improve writability. For this reason, the pen tip may become deformed, however, this is not a failure. • The touch pens cannot be used as touch pens and digitizer pens at the same time. When the setting is changed in the Touch pen Management Tool, all touch pens become digitizer pens. Multiple digitizer pens cannot be used at the same time. E 20