Sharp PN-C703B Pen Software Operation Manual - Page 17

Turning Power On/Off Caution • Turn on the monitor first before turning on the computer or playback device. • When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction. Turning power off Turning power off with monitor buttons Turning on the main power Main power switch Caution • The main power must be turned on/off with the main power switch. Do not connect/disconnect the power cord or turn the breaker on/off while the main power switch is on. • For a complete electrical disconnection, pull out the main plug. POWER button 1. Touch the POWER button. The recognition screen appears. 2. Touch [OK]. The power is turned off. (Standby mode) TIPS • If about 15 seconds elapses while the recognition screen appears, the power will automatically turn off. Turning power off with remote control unit Turning power on Press the POWER button to turn the power ON. Status Green lit Orange lit Green flashing Power LED POWER button Status of the monitor Power on Power off (Standby mode) Input signal waiting mode 1. Press the POWER button. The power is turned off. (Standby mode) TIPS • When the main power switch is off, the monitor cannot be turned on. • If the monitor is in input signal waiting mode and you press the POWER button, the monitor enters standby mode. • Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode. • To disable the logo screen from displaying when turning the power ON, set LOGO SCREEN to OFF on the OTHERS menu. (See page 35.) TIPS • You can fix the input mode that appears after startup. Set START INPUT MODE on the SETUP menu. 17 E