Sharp PN-C703B Pen Software Operation Manual - Page 24
Basic Operation, Using the touch menu
View all Sharp PN-C703B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Basic Operation Using the touch menu You can touch the monitor to change input mode, volume, and other settings. (2) V olume adjustment Changes the volume. 15 Increases the volume. 1. Touch the TOUCH MENU button. TOUCH MENU button 2. Touch the screen to change settings. INPUT SIDE INPUT TERMINAL D-SUB2 HDMI2 HDMI3 BOTTOM INPUT TERMINAL D-SUB1 DisplayPort HDMI1 (4) (1) (2) (3) (1) INPUT (Input mode selection) Changes the input mode. Input mode DisplayPort HDMI1 HDMI2 HDMI3 D-SUB1 Video DisplayPort input terminal HDMI1 input terminal*1 HDMI2 input terminal*2 HDMI3 input terminal*3 D-sub1 input terminal*4 D-SUB2 D-sub2 input terminal Audio *5 • When the input mode is changed, the touch panel connection also changes. You can set whether the side or bottom USB port is used in each input mode. (See page 32.) *1 Select the terminal to be used in HDMI1 of INPUT SELECT. (See page 31.) *2 Select the terminal to be used in HDMI2 of INPUT SELECT. (See page 31.) *3 Select the terminal to be used in HDMI3 of INPUT SELECT. (See page 31.) *4 Select the terminal to be used in D-SUB1 of INPUT SELECT. (See page 31.) *5 Select the terminal for AUDIO SELECT which is used for audio input. (See page 31.) Decreases the volume. Mutes the sound. Touch again to return the sound to the original volume. (3) T ouch action setting Touch to disable touch action. Touch again to enable touch action. TIPS • When the input mode is changed, the disable touch action setting is canceled. • When TOUCH OUTPUT INVALID ICON is set to ON and touch action is disabled, the TOUCH OUTPUT INVALID icon appears in the monitor. • You can touch the TOUCH OUTPUT INVALID icon in the monitor to enable touch action. • The position of the TOUCH OUTPUT INVALID icon can be changed. (See page 33.) • The TOUCH OUTPUT INVALID icon appears even when a USB cable is not connected. (4) E xit touch menu Closes the touch menu. TIPS • The touch menu can also be used with the remote control unit. (1) Hold down DISPLAY at least 5 seconds. The touch menu appears. (2) Select the setting item with . (3) Set with , and press . ENTER - The setting is entered. - Press RETURN to exit the touch menu. E 24