Sharp PN-C703B Pen Software Operation Manual - Page 62
Specifications
View all Sharp PN-C703B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Specifications nProduct Specifications Model PN-L803CA LCD component 80" Class [80 inch (203.2cm) diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx. 1.06 billion colors Pixel pitch 0.923 mm (H) × 0.923 mm (V) Viewing angle 176° right/left/up/down (contrast ratio ≥ 10) Screen active area inch (mm) 69-3/4 (W) x 39-1/4 (H) (1771.2 x 996.3) Computer input signal Analog RGB (0.7 Vp-p) [75 Ω], DisplayPort 1.1a Sync signal Horizontal/vertical separate (TTL: positive/negative), Sync-on-green*1, Composite sync (TTL: positive/negative)*1 Video color system NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM Plug and play VESA DDC2B Power management VESA DPMS Input terminals PC/AV HDMI x 3 PC Mini D-sub 15 pin, 3 rows x 2 DisplayPort x 1 Audio 3.5 mm mini stereo jack x 2 Serial (RS-232C) 3.5 mm mini jack x 1 Output terminals Video/Audio DisplayPort x 1 Audio 3.5 mm mini stereo jack x 1 LAN terminal 10 BASE-T/100 BASE-TX Speaker output (internal/external) 10 W + 10 W/10 W + 10 W 6 Ω Touch Panel Detection method Capacitive type PC connector USB (2.0 compliant) (Type B) x 2 Touch pen Wireless communication method (2.4 GHz, Bluetooth Low Energy, FHSS method) Touch pen adapter port USB (2.0 compliant) (Type A) Power requirement AC 100 V - 240 V, 3.2 A, 50/60 Hz Operating temperature *2*3 41°F to 95°F (5°C to 35°C) Operating humidity*3 20% to 80% (no condensation) Power consumption (Maximum / input signal waiting mode *4 / standby mode *5) 280 W / 6.0 W / 3.5 W Dimensions (excluding protrusions) inch (mm) Approx. 72-13/16 (W) x 3-3/4 (D) x 42-3/16 (H) (1850 x 96 x 1072) Weight lbs. (kg) Approx. 169.8 (77) *1 D-sub input terminal only. *2 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments. *3 In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satisfied. *4 When CONNECT AUTO INPUT SELECT and NO SIGNAL AUTO INPUT SEL. are set to OFF. *5 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. E 62