Sharp PN-C703B Pen Software Operation Manual - Page 9

Supplied Components If any components are missing, please contact your dealer.  Liquid Crystal Display Monitor: 1  Remote control unit: 1  Power cord: 1  Remote control unit battery (R-6 ("AA" size)): 2  Cable clamp: 3  Cable clamp (insertion type): 4  CD-ROM (Utility Disk): 1  RS-232C conversion cable (3.5mm mini jack): 1  SHARP Display Connect License: 1  Eraser (for capacitive touch panel): 1  Setup Manual: 1  Camera mount: 1  Touch pen (for capacitive touch panel): 2  Camera screw (inch thread): 1  Touch pen adapter: 1  Touch pen adapter screw (Step screw, M3): 1  Pen tip for touch pen  Speaker cover attachment screws (M3)/ (for capacitive touch panel): 8 Camera mount screws (M3): 6  Touch pen battery  Vertical sticker (Logo): 1 (LR-03 ("AAA" size)): 2  ID labels (for touch pen): 4 x 2  Tray: 1  Cover SHARP logo: 1  Speaker cover: 2 Place this sticker onto the SHARP logo to cover  USB cable: 1 the logo. * SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission. * For environmental protection! Do not dispose of batteries in household waste. Follow the disposal instructions for your area. System Requirements Computer OS CPU Memory Free space on hard drive PC/AT compatible computer with a USB 2.0 port and able to output a resolution of 1920 x 1080. (CD-ROM drive required for software installation.) Windows 7 (32-bit or 64-bit version), Windows 8.1 (32-bit or 64-bit version), Windows 10 (32-bit or 64-bit version) Intel Celeron B810E 1.6 GHz or faster Intel Core i7-3517UE 1.7 GHz or faster recommended At least 2 GB At least 5 GB (free space separately required for data storage) To use the touch panel, the touch panel and computer must be connected, and Touch pen Management Tool, and Pen Software must be installed on the computer from the supplied CD-ROM. When the Information Display Downloader is installed, you can check and download the most recent versions of the software programs. To install the software, see the manual for each. The USB port varies depending on the terminal connected to the computer. D-sub 1 input terminal/DisplayPort input terminal/HDMI 1 input terminal USB 1 port D-sub 2 input terminal/HDMI 2 input terminal/HDMI 3 input terminal USB 2 port (Factory setting. Can be changed in TOUCH INPUT SELECT in the SETUP menu.) Download the setup program for the SHARP Display Connect and Touch Viewer with the Information Display Downloader. 9E