Sharp SD-AS10 SD-AS10 Operation Manual - Page 14
System installation
UPC - 074000413757
View all Sharp SD-AS10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
SD-AS10 System installation Installation image (with optional accessories): Front speaker (left) Center speaker Front speaker (right) Subwoofer Surround speaker (left) Surround speaker (right) " Placing the speaker system The best surround effect will be achieved by placing each speaker at the same distance from the listening position. It is recommended to arrange the speakers as shown below. Center Front speaker Front speaker (left) speaker (right) Subwoofer Surround speaker (left) Default setting: 6 feet (2 m) Surround speaker (right) Preparation for Use - System installation - " Magnetically shielded speakers The front, surround and center speakers may be placed beside or near the TV as they are magnetically shielded. However, discoloration may occur depending on the TV type. If color variation occurs... Turn off the TV (with the power switch). After 15 - 30 minutes, turn the TV on again. If the color variation is still present... Move the speakers further away from the TV. Refer to the manual of the TV for details. Note: The subwoofer is not magnetically shielded. Notes: ! The default distance is set to 6 feet (2 m). If speakers cannot be placed at equal distances, refer to "Speaker delay setting" (see page 44). ! Place the TV halfway between the front speakers. ! It is recommended that the center speaker be placed near the television. ! Place the surround speakers at a position just above the height of your ears. ! You can place the subwoofer anywhere you like. As it vibrates while reproducing bass, place it on a stable, sturdy surface. Front speaker (left) Front speaker (right) Center speaker 14