Sharp SD-AS10 SD-AS10 Operation Manual - Page 44

Advanced Features - Changing the default settings of the amplifier - SD-AS10 Changing the default settings of the amplifier (continued) Switch the function to "DVD" to change the default settings of the amplifier. If you press during the operation, you can go back one step. " Speaker delay setting When some of the speakers are at a different distance from the listening point, you can select the speaker delay to make it seem as though the speaker distances are the same. 1 Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET UP button. 2 Within 10 seconds, press the or button to select "SP DELAY", and press the ENTER button. 3 Within 30 seconds, press the or button to select the desired speaker. The indicator of the selected speaker flashes. LCR SW SL SR 4 Within 30 seconds, press the or button to select the distance. ! You can change the distance in 1 foot (0.3 m) steps. ! To set the distance of other speakers, repeat the operation from step 3. LCR SW SL SR 5 Press ENTER button to confirm the setting. 6 Press the RETURN button twice. The setting is complete. Speaker type FL Front speaker (Left) CT Center speaker FR Front speaker (Right) SR Surround speaker (Right) SL Surround speaker (Left) SW Subwoofer Delay range 1 to 29 ft 1 to 29 ft 1 to 29 ft 1 to 29 ft 1 to 29 ft 1 to 29 ft Default setting 6 ft (2 m) 6 ft (2 m) 6 ft (2 m) 6 ft (2 m) 6 ft (2 m) 6 ft (2 m) 44