Sharp SD-AS10 SD-AS10 Operation Manual - Page 38

Radio Operation - Listening to the radio - SD-AS10 Listening to the radio 38 1 Turn on the power and press the TUNER (BAND) button to set the input to "FM (AM)". 2 Press the TUNER (BAND) button repeatedly to select the desired frequency band. FM stereo FM mono AM 3 Press the TUNING ( or ) button to tune in to the desired station. Manual tuning: Press the TUNING button as many times as required to tune in to the desired station. Auto tuning: When the TUNING button is pressed for 0.5 seconds or more, scanning will start automatically and the tuner will stop at the first receivable broadcast station. ! When radio interference occurs, auto scan tuning may stop automatically. Should this happen, tune in manually. ! Auto scan tuning will skip weak signal stations. ! To stop the auto tuning, press the TUNING button again. You can also use the TUNER (BAND), TUNING DOWN or TUNING UP button on the main unit. To receive an FM stereo transmission: Press the TUNER (BAND) button to display the "ST" indicator. ! " " will appear when an FM broadcast is in stereo. FM stereo mode indicator FM stereo receiving indicator ! If the FM reception is weak, press the TUNER (BAND) button to turn off the "ST" indicator. The reception changes to mono, and the sound becomes clearer. After use: Press the POWER button to enter the power stand-by mode.