Sharp SD-AS10 SD-AS10 Operation Manual - Page 43
Changing the default settings of the amplifier
UPC - 074000413757
View all Sharp SD-AS10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Advanced Features - Changing the default settings of the amplifier - Changing the default settings of the amplifier Installation image (with optional accessories): Front speaker (left) Center speaker Front speaker (right) Subwoofer Change settings according to the connected speakers. Speaker delay setting (See page 44.) Speaker level setting (See page 45.) Test tone (See page 45.) Example: If the right surround speaker is 10 feet (3.3 m) away from the listening position, change settings as shown below (adjust the SR). CT FL FR CT FL FR SW SW SD-AS10 Surround speaker (left) Surround speaker (right) SL SR SL Default setting: 6 feet (2 m) 10 feet (3.3 m) SR 1 In "Speaker delay setting", set the right surround speaker (SR) to 10 feet (3.3 m). 2 In "Speaker level setting", slightly increase the level of the right surround speaker as it is a little farther than others (see page 45). 3 In "Test tone", check the sound from each speaker (see page 45). Note: The subwoofer setting applies to a subwoofer connected to SUBWOOFER PREOUT. 43