Sharp SD-AS10 SD-AS10 Operation Manual - Page 17
Antenna connection
![]() |
UPC - 074000413757
View all Sharp SD-AS10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
" Connecting the system connection cable Connect the main unit and amplifier unit as follows. Amplifier unit To connect: Screw The plug is directional. Connect it with the arrow facing toward the screw. To disconnect: Pull the plug straight out pressing the plug. 1 Push System connection cable Arrow 2 Unplug Antenna connection Supplied FM antenna: Connect the FM antenna wire to the FM 75 OHMS jack and position the FM antenna wire in the direction where the strongest signal can be received. Supplied AM loop antenna: Connect the AM loop antenna wire to the AM and GND terminals. Position the AM loop antenna for optimum reception. Place the AM loop antenna on a shelf, etc., or attach it to a stand or a wall with screws (not supplied). Note: Placing the antenna on the unit or near the AC power cord may cause noise pickup. Place the antenna away from the unit for better reception. FM antenna AM loop antenna Black White Amplifier unit Installing the AM loop antenna: < Assembling > < Attaching to the wall > SD-AS10 Preparation for Use - System connections / Antenna connection - Main unit How to open side cover Open the side cover to connect the system. 2 1 Wall Screws (not supplied) Outdoor FM or AM antenna: Use an outdoor FM or AM antenna if you require better reception. Consult your dealer. When using an outdoor AM antenna, be sure to keep the wire of the AM loop antenna connected. Outdoor FM antenna Outdoor AM antenna 49 feet (15 m) 25 feet (7.5 m) Ground rod Ground wire AM loop antenna 17
![](/manual_guide/products/sharp-sdas10-sdas10-operation-manual-963a9eb/17.png)