Sharp SD-AS10 SD-AS10 Operation Manual - Page 45
Speaker level setting, Test tone
UPC - 074000413757
View all Sharp SD-AS10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Advanced Features - Changing the default settings of the amplifier - SD-AS10 " Speaker level setting If sounds from the speakers are uneven, you can equalize them by adjusting the speaker levels. 1 Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET UP button. 2 Within 10 seconds, press the or button to select "SP LEVEL", and press the ENTER button. 3 Within 10 seconds, press the or button to select the desired speaker. LCR SW SL SR The indicator of the selected speaker flashes. 4 Within 10 seconds, press the or button to adjust the level. ! You can adjust the level at 1 dB intervals. ! To adjust the levels of other speakers, repeat the op- eration from step 3. LCR SW SL SR 5 Press the RETURN button twice. The setting is complete. " Test tone You can check each speaker sound by a test tone. Readjust the volume set in "Speaker level setting". 1 Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET UP button. 2 Within 10 seconds, press the or button to select "TONE", and press the ENTER button. The test tone will be heard from each speaker, in order, at about 2-second intervals. FL CT FR SW SL SR To adjust speaker levels While the test tone is heard: Adjust the level with the or button. Press the or to select a speaker. 3 Press the RETURN button twice. The setting is complete. Speaker type FL Front speaker (Left) CT Center speaker FR Front speaker (Right) SR Surround speaker (Right) SL Surround speaker (Left) SW Subwoofer Level range - 6 dB to + 6 dB - 6 dB to + 6 dB - 6 dB to + 6 dB - 6 dB to + 6 dB - 6 dB to + 6 dB - 10 dB to + 10 dB Default setting 0 dB 0 dB 0 dB 0 dB 0 dB + 3 dB Note: If subwoofer sound is distorted, lower the subwoofer level. 45